A Switchable Transceiver
The DJI SDR Transmission 2 is a transceiver that can switch between transmitter (TX) and receiver (RX) roles. The unit weighs about 136 g, and its TX/RX-switchable design means there is no need to decide the transmitter-to-receiver ratio in advance.
A single transmitter can feed up to eight receivers, each with remote control. DJI says up to five transmitters and 40 receivers can operate simultaneously. The manufacturer also says the wireless camera feed stays stable without sacrificing 4K image quality in complex on-set environments.
Video, Range and Monitoring
The system transmits DCI 4K at 60 fps in 10-bit HDR, using H.265 video at bitrates up to 50 Mbps. DJI lists a maximum transmission range of 4 km and minimum latency of 35 ms.
For monitoring, the transceiver provides HDMI and USB-C ports. DJI says video can be output to professional monitors via SDI, HDMI or DP; SDI is available on the separately sold expansion plate. A smartphone or tablet can connect to the receiver by USB-C for wired monitoring.
Regional Pricing
DroneXL reports UK pricing of £309 for one unit and £559 for a combo with two transceivers. In the eurozone, it reports prices from €349 for one unit and from €629 for the combo. The report also says sales opened on September 17, 2026, through DJI’s online store, DJI Stores and authorized retailers.
The same report says the product had been on sale in China since September 1 at 1,999 yuan. DJI’s Hong Kong store lists the SDR Transmission 2 at HKD $2,399.
U.S. Availability
DroneXL reports that the SDR Transmission 2 is not listed for sale in the United States. The article links this market situation to the FCC’s addition of DJI communications equipment to its Covered List on December 22, 2025, and explains that listed equipment cannot receive the authorization a new model needs before import or sale in the United States.
The report says DJI filed a petition for reconsideration and that the FCC had not ruled on it at the time of publication. It also says existing 2024 SDR Transmission units remain legal to own, use and resell, and that the FCC waived the firmware cutoff for pre-listing equipment through at least January 1, 2029.
Ronin Compatibility
DJI lists the SDR Transmission 2 as compatible with RS 5, RS 4 Pro, RS 4, RS 3 Pro, Ronin 2 and Master Wheels. When the transceiver is connected to an RS-series stabilizer, the stabilizer can power it; the DJI Ronin app supports wireless control of RS-series stabilizers, including Force Mobile, virtual joystick and gimbal recentering.
The connection cable depends on the equipment. DJI says RS 4 Pro, RS 4 and RS 3 Pro require a separately sold USB-C-to-CAN cable. Ronin 2 and Master Wheels require a separately sold USB-C-to-4-pin cable. For RS 5, DJI specifies the included USB-C-to-USB-C firmware update cable.
Specifications Compared With the Original
DJI’s product comparison lists these specifications for the SDR Transmission 2 and SDR Transmission:
| Feature | SDR Transmission 2 | SDR Transmission |
|---|---|---|
| Video transmission | DCI 4K/60fps, 10-bit HDR | 1080p/60fps |
| Maximum encoding bitrate | 50 Mbps | 20 Mbps |
| Maximum transmission distance | 4 km (CE) | 3 km (FCC) |
| Minimum latency | 35 ms | 35 ms |
| Weight | Approx. 136 g (transceiver) | Approx. 145 g (transmitter or receiver) |
| Video ports | USB-C, HDMI, DP; SDI on expansion plate | USB-C, HDMI, SDI |
| Power supply | NP-F battery, USB-C (PD), gimbal power | NP-F battery, USB-C (PD), gimbal power |
DJI describes the SDR Transmission 2 as supporting TX/RX switching and up to eight receivers per transmitter. Its comparison lists the original SDR Transmission as having a fixed transmitter/receiver arrangement and broadcast support for unlimited receivers.