A transatlantic cable designed for 1 petabit per second
Meta announced Petal as a planned subsea cable linking France and the United States across approximately 7,000 kilometers. The company says the system is designed for 1 petabit per second (1 Pbps), or 1,000 terabits per second, and expects it to enter service in 2029. These are specifications and a schedule for a project in development, not measured results from an operating cable.
Meta says Petal will have twice the capacity of today’s most advanced transoceanic cables over a comparable distance. To illustrate the scale, the company estimates that 1 Pbps could carry around 6.25 billion simultaneous audio streams at 160 kilobits per second, which it compares with roughly 75% of the world’s population. That is a theoretical capacity comparison, not a forecast of how many people will stream audio or how the cable’s capacity will be used.
Two-core optical fiber
Petal is designed around multi-core fiber, with two light-guiding cores inside each fiber. The planned system uses 24 pairs of these fibers; Meta says this arrangement is equivalent in capacity to 48 pairs of conventional single-core fiber. The approach increases the data carried by each fiber rather than relying only on adding more fibers to the cable.
Subsea cables use repeaters to amplify optical signals along their route. In Meta’s design, an interface separates the two cores at each repeater, where single-core fiber amplifiers handle the signals before they are combined back into two-core fiber. The design aims to double capacity without a proportional increase in power use or physical infrastructure. Meta also says the system will remain within the limits of existing power-feeding equipment, rated up to 18 kilovolts.
The design has to limit both signal loss and crosstalk, the interference between the two cores. Meta describes using high-purity synthetic silica and optical characteristics intended to reduce that interference. These are design choices for a route of about 7,000 kilometers; real-world performance will depend on the completed and installed system.
NEC, Sumitomo Electric, and Orange
Meta is developing Petal with NEC and Sumitomo Electric Industries and is working with Orange on the French landing plans. Meta identifies NEC as the turnkey system supplier, responsible for engineering, manufacturing, and installing the system. Sumitomo Electric, NEC’s fiber supplier, is developing and manufacturing the two-core fiber.
Meta and Orange are planning a landing on France’s Atlantic coast, with a terrestrial connection into the European network. The subsea span is therefore one part of a wider connection that also depends on land-based infrastructure.
Why subsea cables matter
Subsea cables are a critical part of the internet’s physical infrastructure. Meta estimates that they carry about 99% of intercontinental data traffic, linking networks across continents for communications and digital services. The company says growing demand for digital services also increases the need for international cable links.
Meta says it has invested in more than 20 subsea cable projects, including Project Waterworth. Petal would add another high-capacity transatlantic link to those investments. Meta presents the project as a way to increase capacity and resilience in infrastructure connecting continents.
Service is planned for 2029
Meta expects Petal to enter service in 2029. Its 1 Pbps capacity and the aim of avoiding proportional increases in power use and infrastructure are announced design goals; actual performance will depend on the system’s construction, installation, and operation.
The multi-core approach is intended to increase the capacity of an ocean-spanning link without relying solely on adding more fibers. If Petal meets its stated target, it will connect France and the United States with greater capacity than the advanced transoceanic systems Meta uses for comparison. That figure alone does not determine internet speeds in homes: those also depend on provider networks, demand, and the other links data travels through.